Sự miêu tả
Every Cascade model takes a specific Noryl impeller from PerformancePro, and the low RPM models use trimmed versions of the same castings. That's why this listing goes by pump model instead of impeller part number.
Find the model number on your pump's label and pick it above. We ship the impeller PerformancePro specifies for that model, cut to the matching diameter.
| Pump model | Line | Impeller | Trim diameter |
|---|---|---|---|
| C1/8-22 | Low RPM | CN3/4 | 4.275 in. |
| C1/8-26 | Low RPM | CN3/4 | 4.80 in. |
| C1/8-36 | Low RPM | CN2 | 4.09 in. |
| C1/4-44 | Low RPM | CN2 | 4.80 in. |
| C1/4-49 | Low RPM | CN3 | 4.80 in. |
| C1/3 | High RPM | CN1/3 | 4.80 in. |
| C1/2 | High RPM | CN1/2 | 4.80 in. |
| C3/4 | High RPM | CN3/4 | 4.80 in. |
| C1 | High RPM | CN1 | 4.80 in. |
| C1 1/2 | High RPM | CN1 1/2 | 4.80 in. |
| C2 | High RPM | CN2 | 4.80 in. |
If the part number on your old impeller starts with CP (polypropylene), contact us and we'll get you the right one.
Pumps that use an impeller set screw take PerformancePro's reverse-thread set screw with gasket (ASI-09), in our O-rings, set screws and drain plugs listing. It has a left-hand thread, so it turns clockwise to come out.
Not sure which part you need? Use our PerformancePro Parts Finder to see every part for your pump, or contact us with the model number from your pump's label and we'll confirm it for you.
Documentation
Ước tính vận chuyển
Thanh toán & Bảo mật
Thông tin thanh toán của bạn được xử lý an toàn. Chúng tôi không lưu trữ thông tin thẻ tín dụng cũng như không có quyền truy cập vào thông tin thẻ tín dụng của bạn.